BetaFPV HX100 Canopy EOS2 Camera

BetaFPV HX100 Canopy EOS2 Camera

Awesome canopy with PC material, gain all the advantages of tough, strong, flexible and heat-rersistant. With adjustable 25- 45 angle, this canopy is perfectly suitable for the EOS2 camera, and also compatible with Beta85X, Beta75X, Beta75 Pro 2 and HX100 FPV Quad. You can use it for DIY building of Beta75X or Beta75 Pro 2 with EOS2 camera.


Installation on HX100 





Installation on Beta75 pro 2 Frame

Please note the Blue hole is for canopy mount, while the black hole is for FC mounting.





 




Bullet Point


This canopy is made of PC material, which is anti-ruin and heat-resistant, with high strength and toughness, provide well protection for the drone.
Ajustable Angle: 25- 45 adjustable so that it could support different flying situations (freestyle or racing alike).
Thoughtful design on installation: Specially designed with EOS2 mounting holes and VTX mounting holes, no need to install the fixed mount anymore.


 

 

 

 

 

Specification


Material: PC
Color: Black / Blue
Weight: about 2.4g
Tilt Angle: 25-45 Adjustable
Adapt Camera: EOS2 camera
Adapt Frame: Beta75X Frame, Beta75 Pro 2 Frame, Beta 85X Frame , HX100 Frame


Package


1 * Canopy for EOS2 Camera 

idź do sklepu
Napisz opinię
Canopy/obudowa BetaFPV 85X Eos2

Canopy/obudowa BetaFPV 85X Eos2

Awesome canopy with PC material, gain all the advantages of tough, strong, flexible and heat-rersistant. With adjustable 25- 45 angle, this canopy is perfectly suitable for the EOS2 camera, and also compatible with Beta85X, Beta75X and Beta75 Pro 2. You can use it for DIY building of Beta75X or Beta75 Pro 2 with EOS2 camera. Bullet Point This canopy is made of PC material, which is anti-ruin and heat-resistant, with high strength and toughness, provide well protection for the drone. Ajustab

idź do sklepu
Canopy/obudowa na kamerę tarsier 4k do drona BetaFPV 85X 4K

Canopy/obudowa na kamerę tarsier 4k do drona BetaFPV 85X 4K

This canopy is customized for the Tarsier 4K camera with adjustable 15- 35 angle, with the ND8 filter, the adjustable angle is 20- 30. It's a perfect choice for Beta85X 4K, you can also use it to DIY Beta85X with Beta85X 4K frame and Tarsier 4K camera . Bullet Point This canopy is made of PP material, which is harder, flexible and heat-resistant, hard to break, can provide extra protection for the drone. Comes with Tarsier 4K mounting hole, no need to install camera mount, more easier to in

idź do sklepu
Dron Whoop BetaFPV 85X HD FPV 2-4S EOS2

Dron Whoop BetaFPV 85X HD FPV 2-4S EOS2

Specification Weight: 58g (without battery) Motors: 1105 6000KV with connector Props: EMAX Avan 2" 4-Blades Props HD DVR Camera: CADDX Turtle V2 ( for HD DVR version) Receiver Option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire Frame: Beta85X Frame 5.8G VTX antenna: Customized Lumenier AXII antenna Battery strap fit for micro 3S-4S battery

idź do sklepu
Rama Canopy Śmigła do drona TinyWhoop 7x16 65mm Cameleon BetaFPV

Rama Canopy Śmigła do drona TinyWhoop 7x16 65mm Cameleon BetaFPV

SPECIFICATION Frame base: 65mm wheelbase distance Frame motor holder: 7x16mm motors Propeller: 31mm 3-blade 0.8 shaft  Canopy: Chameleon Canopy   PACKAGE Note:Durable plastic package is designed to protect the frame from deformation during the shipping process. 1* Beta65S Chameleon Frame 1* Chameleon Canopy 4* CW 3-blade 31mm Whoop Props (0.8 shaft) 4* CCW 3-blade 31mm Whoop Props (0.8 shaft)

idź do sklepu
Rama + Canopy do drona TinyWhoop 7x16 65mm BetaFPV

Rama + Canopy do drona TinyWhoop 7x16 65mm BetaFPV

SPECIFICATION Frame base: 65mm wheelbase distance Frame motor holder: 7x16mm coreless motors Frame Color: Flame / Evil / Graffiti / Galaxy  PACKAGE Durable plastic package can protect the frame from deformation during delivery process. 1* Combo of Sleek Frame and Canopy for Beta65S

idź do sklepu
Nadajnik wideo VTX BetaFPV A01 25-200 mW

Nadajnik wideo VTX BetaFPV A01 25-200 mW

FEATURE Switchable power includes 0mW, 25mW and 200mW. SmartAudio function is included in this VTX. The flight controller can communicate with the video transmitter using the audio line in. It allows the flight controller to know what frequency the vtx is using, and to change it. PitMode is supported on this VTX. Dipole whip high sensitivity antenna. It is mounted to the VTX board durable.   SPECIFICATION Output power: 0mW, 25mW and 200mW (Adjustable) Supply Voltage:

idź do sklepu
Dron TinyWhoop BetaFPV 65Pro FPV flysky

Dron TinyWhoop BetaFPV 65Pro FPV flysky

SPECIFICATION Frame Wheelbase: 65mm Propeller: 31mm 4-blades propellers Motors: 0603 19000KV Fligh Controller: BETAFPV F4 1S Frky Brushless FC / F4 No RX Brushless FC Firmware version: betaflight_matekf411rx_3.5.0 ESC: 5A BLHeli ESC (integrated with FC) Camera VTX: Z02 AIO Camera 5.8G VTX (Wire Connected Version 25 degree) (25mW only) Battery: 260mAh Lipo HV Battery Receiver: Built in SPI Frsky receiver (D8 D16) / SPI Futaba receiver / Flysky receiver / Fullspeed DSMX receiver We

idź do sklepu
Rama do drona BetaFPV HX100 toothpick

Rama do drona BetaFPV HX100 toothpick

This HX100 carbon fiber frame is customized for HX100 FPV Quad - the first generation of carbon fiber kit of Betafpv, small but with dynamic flight. Compatible with 1103 8000KV motors and F4 2-4S AIO 12A FC. At the same time, it is  durable and light enough for a 3S whoop beast. Bullet Point Specially made for HX100 FPV Quad as the , produced with carbon fiber with a strong root design to be super durable, can increase flight stability while minimizing power loss. Convenient installation

idź do sklepu
Dron TinyWhoop BetaFPV 75Pro FPV frsky BNF

Dron TinyWhoop BetaFPV 75Pro FPV frsky BNF

SPECIFICATION Frame: 75pro frame Propeller: 40mm 4-blades propellers Motors: 0703 19000V Fligh Controller: BETAFPV F4 1S brushless FC /  F4 1S No RX Brushless FC Firmware version: betaflight_matekf411rx_3.5.0 ESC: 5A BLHeli ESC (integrated with FC) Camera VTX: Z02 AIO Camera 5.8G VTX (Wire Connected Version 25 degree) Battery: 550mAh Lipo HV Battery Receiver: Built in SPI Frsky receiver (D8 D16) / SPI Futaba receiver / Flysky receiver / Fullspeed DSMX receiver Weight: 28.4g (with

idź do sklepu
Dron TinyWhoop BetaFPV 75Pro FPV flysky

Dron TinyWhoop BetaFPV 75Pro FPV flysky

SPECIFICATION Frame: 75pro frame Propeller: 40mm 4-blades propellers Motors: 0703 19000V Fligh Controller: BETAFPV F4 1S brushless FC /  F4 1S No RX Brushless FC Firmware version: betaflight_matekf411rx_3.5.0 ESC: 5A BLHeli ESC (integrated with FC) Camera VTX: Z02 AIO Camera 5.8G VTX (Wire Connected Version 25 degree) Battery: 550mAh Lipo HV Battery Receiver: Built in SPI Frsky receiver (D8 D16) / SPI Futaba receiver / Flysky receiver / Fullspeed DSMX receiver Weight: 28.4g (with

idź do sklepu
Obudowa/canopy Beta FPV - Kameleon

Obudowa/canopy Beta FPV - Kameleon

Bullet Point This plastic canopy is still low enough to look down between the ducts to drop thru small slots or gaps. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. All stock hardware is used, super simple installation.

idź do sklepu
Obudowa/canopy Beta FPV - Ameryka

Obudowa/canopy Beta FPV - Ameryka

Bullet Point This plastic canopy is still low enough to look down between the ducts to drop thru small slots or gaps. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. All stock hardware is used, super simple installation.

idź do sklepu
Obudowa/canopy Beta FPV - Evil

Obudowa/canopy Beta FPV - Evil

Bullet Point This plastic canopy is still low enough to look down between the ducts to drop thru small slots or gaps. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. All stock hardware is used, super simple installation.

idź do sklepu
Obudowa/canopy Beta FPV - przezroczysta

Obudowa/canopy Beta FPV - przezroczysta

Bullet Point This plastic canopy is still low enough to look down between the ducts to drop thru small slots or gaps. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. All stock hardware is used, super simple installation.

idź do sklepu
Obudowa/canopy Beta FPV - biała

Obudowa/canopy Beta FPV - biała

Bullet Point This plastic canopy is still low enough to look down between the ducts to drop thru small slots or gaps. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. All stock hardware is used, super simple installation.

idź do sklepu